Dual Boot For Mac

Dual Boot For Mac And Windows
Dual Boot Software For Mac
Best Dual Boot For Mac
Dual Boot Mac Windows 10

When your Mac powers up, it normally uses the system on its internal hard drive unless you change this behavior by choosing System Preferences@@→Startup Disk. You can also change what your Mac does by holding down the following keys or key combinations during startup. Print these boot option keys, because they’re particularly helpful to have. Access to macOS. After formatting the drive, the next step is to create a macOS flash drive installer.

Ever wondered if you could dual boot macOS and Windows on the same hard drive disk? With a Hackintosh, you can. While it’s typically better to have macOS on one drive and Windows on another, it’s possible to dual boot both operating systems on the same drive. The dual-boot option is ideal for those who don’t have multiple drives on hand.

How to Dual Boot Windows 10 and MacOS High Sierra on a Hackintosh

The first step in the process is to format the drive as GUID. To do this, you’ll need to use the Disk Utility application, which is the macOS equivalent of Disk Management in Windows.

Disk Utility can be accessed during the install or from within the operating system after the installation is complete.

There’s a very good reason for formatting the disc in the GUID format first. For starters, you’ll need this format to install macOS. But formatting with the Disk Utility will allow you to create a larger hidden EFI partition compared to what you would create with Windows Disk Management (200MB with GUID vs. 100MB with Windows). That extra space will allow you to fit both operating systems with room to spare.

The Windows partition can be created either during the install or after the install. If you want the Windows partition to show up first, then you would want to create the partition during the install. If you want the macOS partition to show up first, then you can create the partition after the installation is completed.

In this guide, we’re going to install the Windows partition second. It’s a simpler, more straightforward way to get your dual-boot Hackintosh up and running.

Once you’ve formatted the drive as GUID, you can move on to the next step.

Access to macOS

After formatting the drive, the next step is to create a macOS flash drive installer. To do this, you’ll either need access to a Mac, or access to a virtual machine that runs macOS.

If you can’t get access to a Mac machine, you can create a virtual machine running macOS.

Creating the Flash Drive Installer

Once you have access to the macOS operating system, you can create the flash drive installer and start the installation process. Keep in mind that you’ll need to wipe the drive before you can format as GUID. And keep the flash drive installer, as you’ll need it later on.

Here’s a quick rundown of how to create the installer.

Download macOS

Open the app store, login with your Apple ID, and download High Sierra.

Dual Boot For Mac And Windows

Format the USB

Insert the flash drive and open Disk Utility. Select the flash drive from the left column, and click erase. Adjust to the following settings:

Name: Hackintosh
Format: Mac OS Extended (Journaled)
Scheme: GUID Partition Map

Next, click “Erase” and then “Done.” Feel free to change the name to whatever you wish. The Partition Map scheme will allow for am EFI partition to be created.

Create the Installer

Open Terminal and paste the following code:

Press enter.
Type in your password.
Press Y when asked to erase.
Press enter again.

Don’t remove your flash drive until the process is complete. It can take up to 60 minutes (maybe more) to copy the installer files into the USB drive. Win xp themes.

Installing MacOS

You should now be able to install macOS High Sierra to your drive. The process will take some time to complete, depending on the type of processor you have.

Your system should restart after the installation process is completed.

Also, you’ll have to go through a few prompts before your machine will be ready to use macOS.

Choose your Country, and click the “Continue” button.
Enable Location Services, and click “Continue.”
Sign in with your Apple ID, or choose “Don’t Sign In” and click “Continue.”
Agree to the Terms and Conditions.
Fill out the form, which asks for your Full Name, Account Name, Password and a Password Hint.
Set your Time Zone based on your location.
Choose “Continue” to create a user for your macOS.

Now, you’ll need to wait while the system sets up your macOS. This may take a while, so be patient.

Create the Windows Partition

Now that you have macOS installed, it’s time to install Windows 10.

Open Disk Utility.
Click the View button at the top left corner of the application and select “Show All Devices.”
Select the drive.
Click Partition at the top of the toolbar.
Click “+” under the circle to add a new partition.
Give the partition a name and choose your desired size (we recommend a minimum of 50GB).
Set the Format to ExFat.
Click Apply.

Install Windows 10 on Your Hackintosh

Just like with macOS, you’ll need either access to Windows or to create a USB flash drive with the operating system on it. Do not wipe out the drive with macOS on it, as you’ll still need it to regain access to macOS. You will need a separate flash drive for this step.

To create the installer:

Download Windows Installer Manager.
Create the installer.

Boot the “UEFI: partition” of the Windows installer. If you don’t boot the “UEFI: partition” of the flash drive, you will get an error and won’t be able to move on to the next step.
Move through the first parts of the installation.
When possible, choose “Custom: Install Windows only (advanced).”
Choose the Windows partition you created in Disk Utility.
Choose Format.
Click OK.
Complete the installation process.

Keep in mind that the system will restart several times during installation.

EFI Cleanup and Clover Access

After installing Windows, it’s time to move back to macOS. For this step, you will need the macOS flash installer you created earlier.

Right now, we can’t boot macOS because the Windows installer modified the EFI folder, which overrides the Clover boot loader with Windows Boot Manager. This causes the UEFI: (drive_name) to disappear from the BIOS boot devices.

In order to get things up and running smoothly, you’ll need to make some changes to the “bootmgfw.efi” file. This is the file that’s preventing access to Clover when booting the system. A simple file name change is all that’s needed to fix the problem.

Boot the “UEFI: partition” of the macOS Installer.
Boot macOS drive.
Open the Clover Configurator.
Select “Mount EFI” from the left column.
Choose “Mount Partition” for your drive.
Select “Open Partition.”
Go to EFI/Microsoft/Boot/.
Rename the “bootmgfw.efi” file to “bootmgfw-orig.efi.”

When you restart, “UEFI: (drive_name)” should now be accessible.

If “UEFI: (drive_name)” is still not showing up as an available boot device, you can override the Windows Boot Manager and redirect it to Clover.

Boot macOS off of your drive again.
Mount the EFI partition of the boot drive using Clover Configuration.
Open the EFI.
Navigate to EFI/Boot.
Copy the file BOOTX64.efi.
Navigate to EFI/Windows/Boot.
Past BOOTX64.efi here.
Rename BOOTX64.efi to bootmgfw.efi.
Restart and boot off the Windows Boot Manager. It should redirect to Clover.

Dual Boot Using Clover

You should now be able to dual-boot using the Clover Menu. To boot Windows, simply select Boot Windows EFI from EFI in Clover.

Adobe acrobat for the mac. Your Web Browser needs UpdatingSolution: This is one of the most common problemsthat can prevent you from being able to read a PDF. Not all not all browsers update automatically, and it could be that yours needs a manual update. Here are the three main reasons why you may have a problem reading a PDF on Mac, and what you can do to solve the problem.Question 1. This is due to a variety of reasons, but luckily this problem is usually quite an easy one to solve in just a matter of minutes. You can usually run a regular software update, but other times you may be required to update manually through the menu.

Related posts:

If you own Intel-based Macs, you can run OS X and Windows on one machine. In fact, it’s been possible to run Windows on a Mac for some time — with agonizing limitations. Near-extinct Mac models were loaded with Virtual PC emulation software could do Windows, too, but the program was painfully slow. Even if you find an old copy of the software, it won’t work with any current Macs.

Boot Camp software from Apple shook up the computing public upon its apocalyptic arrival in April 2006. Boot Camp graduated from beta, or near-finished, status with the arrival of Leopard. Boot Camp Assistant software is stored in the Utilities folder inside the Applications folder.

Boot Camp itself is free. You have to supply your own single-disc or downloadable full-install version of Windows; an upgrade disc won’t cut it.

It’s also important to note that you can use a 64-bit version of Windows, Windows 7 (Home Premium, Professional, or Ultimate), Windows 8, or Windows 8.1. Consult Apple support to see which Mac models are compatible with which versions of Windows. In its current incarnation, Boot Camp isn’t compatible with 32-bit versions of Windows.

Other requirements follow:

An Intel Mac with OS X version 10.6 or later
At least 2GB of RAM and 20GB of available space on the Mac’s storage drive that you want to donate to Windows
A blank CD or USB storage device that you’ll use for Windows software drivers

If you don’t run into snags, the entire installation should take about an hour.

Windows 8 and Windows 8.1 are optimized for a touchscreen environment, though you can use it with a standard mouse and keyboard. For now, Macs don’t support touchscreen computing.

To install Windows 8 via Boot Camp, you still must have a legitimate Windows 8 license from Microsoft and a Win8 installation disc, assuming that you have an optical drive. If you don’t have an optical drive, you may be able to create a Windows installer from an ISO file downloaded from Microsoft on a USB flash drive that’s 8GB or larger.

Because snags are possible, back up all your important information on the Mac’s startup disk.

Basic training

Following are the basic steps to get through Boot Camp:

Run Boot Camp Assistant (in the Utilities folder inside the Applications folder) to make sure that you have the latest firmware on your computer and to install any support software from Apple that you might need.
You’ll find any updates at Apple support. If you’re using a portable computer, make sure to connect the power adapter. You will also be given the option to create a Windows 7 (or later version) install disk for which you’ll need a USB flash drive and an ISO image downloaded from Apple.
Follow the prompts in Boot Camp Assistant to create a partition for Windows.
You’re essentially carving out an area of your hard drive for the Windows operating system,. This partition must be at least 30GB and can swell to the total free disk space on hand minus 30GB. If you don’t plan on doing much in Windows, keep the partition small.
Drag the divider to set the partitions for both OS X and Windows, or click Divide Equally to make equal partitions. You can’t resize a Windows partition after creating it, though you can replace it with a larger Windows partition.
If you have a Mac Pro with more than one internal hard drive, you can select which drive to partition. If any of this makes you nervous, know that you can remove the Windows partition later and go back to a single-partition Mac.
Insert the Windows CD or a USB flash drive with the Windows ISO file and then click Start Installation.
If you exited Boot Camp Assistant before installing Windows, open it again, choose Start the Windows Installer, and click Continue.
When you’re asked to choose the Windows partition, select the partition that says BOOTCAMP.
You may have to scroll down to see it.
Don’t erase any partitions that you see or create a new partition here. Failure to heed this warning could wipe out your entire Mac OS X startup disk.
(Optional) If you see a listing for Drive Options, click it; otherwise, proceed to Step 6.
Reformat the partition by using the Windows installer: Click Format.
You’re using the reliable and secure NTFS file system, but you won’t be able to save files to Windows from Mac OS X, at least not without a techie workaround.
Follow the onscreen instructions to finish installing Windows.
Boot Camp 5.1 includes several Mac drivers so that Windows will recognize your trackpad, Thunderbolt, USB 3.0, the iSight (or FaceTime) camera, the Eject key on the Mac keyboard, networking, audio, graphics, and so on.
A Boot Camp Control Panel for Windows and an Apple Boot Camp system-tray item will be added.

Free download powerpoint for mac os x. As with any new Windows computer, Microsoft requires that you activate your Windows software within 30 days.

Switching operating systems

You can go back and forth between OS X and Windows on your Mac, but you can’t run both operating systems simultaneously under Boot Camp. Instead, you have to boot one operating system or the other — thus, the name Boot Camp.

Dual Boot Software For Mac

Restart your Mac, and hold down the Option key until icons for each operating system appear onscreen. Highlight Windows or Macintosh HD, and click the arrow to launch the operating system of choice for this session.

Best Dual Boot For Mac

If you want OS X or Windows to boot every time, choose app → System Preferences, click Startup Disk, and choose the OS you want to launch by default.

Dual Boot Mac Windows 10

You can perform the same function in Windows by clicking the Boot Camp system-tray icon and selecting the Boot Camp Control Panel. Click either the Macintosh HD or Windows icon, depending on your startup preference.